Jake: Painted Nerf Praxis

Here are some more blasters that my buddy Jake painted.  They are also both modded.  The white and black one is his and the red and black one is his son's.  Both blasters were sand blasted and then painted.  

For this blaster, Jake was going for a snow camo look.  He used a white base coat and then used black hobby paint to do the tree branches.  He finished the whole thing with a clear coat to protect it from scratches.

For this blaster, they put a black base coat down and then did a layer of red on top.  This one is for his son and will be used very often.












If you have any comments please just post them and I will be sure to let Jake and his son know.  Thanks for viewing!

Nerf Proton Mod Guide

Here are my mods for the Nerf Proton

Mods:

1. Increased torsion spring
2. Removed locks

Here is a look at the inside of the blaster when you first open it up

Torsion spring before it was modded

In order to put the torsion spring all the way to the back hole, you need to cut a small  section out of the plastic to it rests in it.  Then put the screw in on top to hold it in place.

Here are all the parts I had left over after I was done removing the locks.

This part of the trigger must be trimmed down in order for you to pull the trigger at any time.  This makes it so  you can also de-prime it.

Here is a last look at the internals before putting it back together.

I really enjoy this blaster.  This blaster shoots farther than the Nerf Praxis.  It is a fun and easy to use blaster. I will be making an attachment for the blaster so that it will drop feed the disks into the tray automatically when pulled back.  I will put a post up when its put together.  Thanks for viewing.